Skip to content
888-980-8580 Pricing & FinancingContactReviews
Schedule a Free In-Home Consultation

How to Choose a Siding Contractor?

By Builders Service Company

Siding contractor installing trim on a home with light lap siding

New siding can completely change how your home looks, but the quality of the installation determines how well it performs over time. If you’re researching how to choose a siding contractor, look beyond attractive photos and low prices. The right professional should understand your home’s condition, Washington’s weather, and the details that prevent moisture damage.

From checking contractor registration to comparing materials and reviewing agreements, this guide explains what to look for before making your decision.

What Should You Look for Before Hiring?

Before choosing a company for your siding project, focus on these six essentials:

  • Verify Washington State contractor registration and insurance.
  • Review completed projects and customer experiences.
  • Ask how moisture barriers, flashing, and damaged walls are handled.
  • Compare siding materials for your climate and budget.
  • Understand the installation schedule and warranty coverage.
  • Get a clear written contract before work begins.

These checks help you find a contractor who can protect your investment, not simply install new panels.

Start by Reviewing Previous Siding Work

A contractor’s past projects can tell you more than a sales presentation.

Look for completed residential siding projects similar to your house. A two-story home with several rooflines, for example, requires different planning than a single-story home with straightforward walls.

Ask to see photographs that show the entire exterior and close-up details around windows, doors, corners, and trim.

You can also ask family, friends, and neighbors about their experiences. Pay attention to communication, reliability, cleanup, and how the contractor handled unexpected problems.

Online reviews are helpful, but read beyond the star rating. Detailed feedback about installation quality, responsiveness, and long-term results gives you a better understanding of what to expect.

Verify Contractor Registration and Insurance

One of the most important steps in learning how to choose a siding contractor is confirming that the business meets Washington’s requirements.

Use the Washington Department of Labor & Industries contractor verification system to check the company’s registration status, bond, insurance, and reported violations.

A properly registered and insured contractor should be willing to explain their credentials.

Before hiring, confirm:

  • Active Washington contractor registration.
  • Current liability insurance and required bonding.
  • Workers’ compensation coverage when applicable.
  • Who will supervise the installation and handle any subcontractors.

Don’t rely on a license number printed on an advertisement alone. Verify the credentials independently.

Ask How the Contractor Protects Your Walls From Moisture

A beautiful siding installation can still fail if water gets trapped behind the panels.

Washington’s rainy conditions make moisture management especially important. A qualified professional should inspect existing siding, check for damaged sheathing, and explain how water will drain away from the wall.

According to the U.S. Department of Energy’s building enclosure guidance, a continuous drainage plane behind exterior cladding helps direct moisture away from wall cavities.

Ask about the following installation details:

  • Weather-resistant house wrap or another approved barrier.
  • Proper flashing around windows and doors.
  • Drainage at the bottom of exterior walls.
  • Inspection and repair of damaged sheathing.
  • Correct fastening and clearances for the selected material.

These details are particularly important around roof-to-wall connections, deck attachments, and window openings.

Important Tip: New siding should never be used to hide existing moisture damage. Ask how damaged wall sections will be documented and repaired before the installation continues.

Choose Siding Materials That Match Washington’s Climate

The right material depends on location, maintenance preferences, exterior design, and budget.

Western Washington experiences extended wet periods, while Eastern Washington faces hotter summers and different weather exposure.

When deciding how to choose a siding contractor, look for someone who explains those differences instead of recommending the same product for every property.

Siding MaterialBest Suited ForImportant Consideration
Vinyl sidingBudget-conscious homeowners seeking low maintenanceProper fastening and room for thermal movement
Metal sidingModern exterior designs and areas with wildfire concernsAppropriate fasteners, trim, and corrosion protection
Evergreen Shield Siding SystemHomeowners seeking insulated composite siding designed for Pacific Northwest weatherProper system installation and product warranty terms

Builders Service Company’s Evergreen Shield system includes composite panels, insulating technology, and 20 fade-resistant color options. The company specifies an R-2.0 thermal resistance for the system.

Ask to see physical samples and discuss how different products will look against your existing roofing, windows, and architectural features.

Review the Written Contract Before Installation Begins

A written contract should clearly explain what you are purchasing and what the contractor is responsible for delivering.

The Washington L&I Hire Smart guide recommends reviewing the work scope, materials, payment arrangements, warranties, and completion dates before signing.

Your agreement should address:

  • Removal and disposal of existing siding.
  • New materials, trim, flashing, and installation methods.
  • Labor responsibilities and permit requirements.
  • Payment schedule and expected completion timeline.
  • Procedures for unexpected repairs or material changes.
  • Product warranty and workmanship coverage.

A material warranty is not necessarily the same as a labor warranty. Ask who handles problems caused by installation errors and how warranty claims are submitted.

Be cautious of contractors who demand full payment upfront or pressure you to sign immediately. The Federal Trade Commission’s home improvement guidance explains these and other warning signs.

Practical Warning: If hidden wood rot is discovered after removal begins, require a written change order explaining the additional repairs and costs before approving the work.

Consider the Age and Condition of Your Home

Older Washington houses often need more preparation than newer properties.

For example, a home with deteriorating wood siding may have hidden damage around windows, wall penetrations, or lower wall sections.

Homes built before 1978 also deserve special attention because disturbing older painted surfaces can create lead dust. The EPA’s lead-safe renovation guidance explains when certified lead-safe renovation practices are needed.

An experienced contractor should evaluate the existing conditions and explain any additional precautions before removal begins.

Checklist for choosing a siding contractor: verify license, check insurance, review past work, ask about moisture protection, compare materials and get a written contract

What Makes Builders Service Company a Strong Choice for Washington Homeowners?

Builders Service Company has served Washington homeowners since 1974, specializing in exterior improvements including siding, roofing, windows, and decking. Founder Mason Ruppel remains actively involved in overseeing projects and often conducts in-home consultations personally. This hands-on approach allows homeowners to discuss materials, exterior conditions, design preferences, and pricing directly.

Rather than recommending a product without seeing the property, the company offers free in-home consultations. During the visit, homeowners can review material samples, discuss the existing exterior, and explore vinyl, metal, and the exclusive Evergreen Shield Siding System. The company’s process includes measurement, removal, inspection, installation, cleanup, and a final walkthrough.

Why Choose Builders Service Company?

  • Established in 1974, with more than 50 years of exterior remodeling experience.
  • Washington contractor registration number BUILDSC027JN.
  • Founder Mason Ruppel remains involved in project oversight.
  • Offers vinyl, metal, and the exclusive Evergreen Shield Siding System.
  • Provides siding backed by an advertised lifetime warranty, with terms available for review.
  • Features completed Washington projects and 59 customer reviews on its Google reviews page.

The company’s familiarity with Washington homes makes it a practical option when you’re considering siding replacement, updating an aging exterior, or improving your home’s weather protection.

Schedule Your Free In-Home Siding Consultation

Choosing new siding should begin with understanding your home, not guessing at materials or prices.

Builders Service Company serves homeowners throughout Washington, including Seattle, Tacoma, Everett, Olympia, Auburn, Kirkland, Lakewood, Wenatchee, and surrounding communities.

If you’re planning an exterior upgrade, schedule a free in-home consultation to discuss your property’s condition, compare available siding options, and review pricing in person.

Frequently Asked Questions About Choosing a Siding Contractor

How Many Siding Contractors Should I Compare?

Comparing three qualified contractors is a practical starting point.

Consider their registration, experience, installation approach, communication, and contract terms rather than selecting based on price alone.

How Long Does Siding Replacement Usually Take?

Many residential siding replacements take approximately one to two weeks once installation begins.

Larger houses, complicated exterior details, weather delays, and unexpected wall repairs can extend the schedule.

Do I Need a Permit for Siding Replacement in Washington?

Permit requirements depend on your local jurisdiction and the scope of the project.

Ask your contractor to confirm applicable requirements with your city or county building department before installation.

Should I Replace Windows and Siding at the Same Time?

Replacing aging windows and siding together can simplify coordination of exterior flashing and trim.

If both upgrades are planned, discuss the installation sequence before either project begins.

Can Siding Be Installed During Washington’s Rainy Season?

Yes, some siding installation activities can proceed during rainy periods when appropriate weather protection and manufacturer requirements are followed.

However, exposed wall assemblies must be protected, and certain preparation or repair activities may require dry conditions.

Is It Better to Repair Existing Siding or Replace It?

Localized damage may justify repairs, while widespread deterioration or recurring moisture problems can make full replacement more practical.

A professional inspection can help determine whether the existing material and underlying wall remain suitable for repair.

50 Years of Washington Home Renovations

Schedule A Free In-Home Consultation
Paige with Builders Service Company

Request a Free In-Home Consultation

Project Type (Required)
Desired Project Completion Date (Required)

When are you hoping to have your project completed?

Best Time To Call (Required)
Call 888-980-8580 Schedule a Free In-Home Consultation